• 
  • Designer
  • Architect
  • Landmark
  • Spotlight
  • Machine Design
  • Fundamentals
  • RenderWorks
• 
  • Downloads
  • BIM in Practice
  • Tech Forum
  • Knowledgebase
  • Academic Resources
  • Customization
  • Register
  • Bug Submit
• 
  • Self-Paced Training
  • Online Training
  • In-Person Training
• 
  • Mailing Lists
  • User Groups
  • Job Board
  • Service Directory
  • 3rd Party Add-ons
  • Latest News
  • Plotter Services
• 
  • U.S. Professional
  • U.S. Government
  • U.S. Academic
  • International
  • Buy Online

:: VectorWorks Downloads ::

General Downloads

Designer

Architect

Landmark

Spotlight

Machine Design

RenderWorks

VectorWorks 8.5.2 Release Notes

8.5.1 and Prior Fixes

Fixed In	Reported In	Description for Release
8.5.0b1	8.0.0b15	The 2D Reshape tool can cause selection handles to show a reversed state. Draw a rectangle and an extrude. Select them both and choose the 2D Reshape tool. Draw the marquee around at least one of the selection handles of each object. Drag the marquee to perform the reshape. Draw another marquee. From this point on one or more of the extrude's selection handles will be reversed (off for selected, on for not selected).
8.5.0b1	8.0.0	"Export VectorScript..." writes bogus statement to text file if the Worksheet contains more than one SUM column for a database row.
8.5.0b1	8.0.1b1	Export 4 rectangles with the same solid fill color to EPSF. When you open the file in Illustrator, four different color numbers are generated.
8.5.0b1	8.0.1b1	On Windows, you can focus on the symbol preview of the resource palette. You can not use the esc key to switch focus to the drawing.
8.5.0b1	8.0.1b1	Call tool doesn't properly trap for tools which it doesn't support. Instead, it puts in a '128' which does nothing.
8.5.0b1	8.0.1b2	The Mac "Create Document" dialog has key equivalents that just barely peek over the edge of the dialog.
8.5.0b1	8.0.1b2	The procedure SprdFormat does not recognize a value of 8 for the 'numForm' parameter, which is Boolean.
8.5.0b1	8.0.1b3	Walls with zero height or width used in solid operations should report zero volume as being the problem, not that the solid cannot be computed.
8.5.0b1	8.0.1b2	Files listed in the most recently used file list that are on the root of a drive display incorrectly. They have a double backslash. For example, the file "C:\house.mcd" displays as "C:\\house.mcd".
8.5.0b1	8.0.1b3	After a symmetric scale, defaults for both X and Y scaling for asymmetric scaling should be the same as the symmetric scale value.
8.5.0b1	8.0.1b2	Solid operations often use twice as much memory as they should to store their geometry.
8.5.0b1	8.0.0	The filled/unfilled properties of extrudes and their sub-objects produce inconsistent results with the polygonal rendering modes.
8.5.0b1	8.0.1b3	PROCEDURE WallHeight and PROCEDURE HLength do not work with round walls.
8.5.0b1	8.0.1	Symbols with plug-ins that observe the plug-ins loci for cutting the wall do not work right when the symbol origin and the plug-in origin are not the same.
8.5.0b1	8.0.1b3	When viewed along its axis, a wall's selection handles disappear.
8.5.0b1	8.0.1b3	After exporting and then importing a Vectorscript file, Vectorworks adds a summation icon where one doesn't exist.
8.5.0b1	8.5.0d	Locus3D does not correctly set the 3D locus as the last created object, so LNewObj fails to return a valid object handle in VectorScript.
8.5.0b1	8.0.1b3	When you place a dormer in a roof and try to edit the dormer you cannot switch between dormers, cancel is the only option.
8.5.0b1	8.0.1b3	If a wall with a symbol is subtracted from another object, the symbol from the wall is duplicated. It would probably make more sense for it to disappear.
8.5.0b1	8.0.1b3	A sweep of less than 360 degrees of a circle does not work as a component of solid operations (add, subtract, intersect.)
8.5.0b1	8.0.1b5FC	The access keys in the Layers Setup dialog for Delta Z (+) and the Transfer Mode (M) do not access the fields. There are currently two M access keys available within this dialog.
8.5.0b2	8.0.0b6	The cursor is not changing back to an arrow when using the feature size widgets in the Edit Texture Image dialog on Windows.
8.5.0b2	8.0.0b14	Sills on windows don't take on either Class colors nor the color assigned to the window container. I think they ought to match the trim color.
8.5.0b2	8.0.0b14	Workspace Editor allows a locked workspace to be edited.
8.5.0b2	8.0.0b15	If you click the Mapping button on the Textures pane of the Object Info palette, and then hit Cancel in the resulting dialog, VectorWorks still insists on rendering the drawing.
8.5.0b2	8.0.0b15	there are two cosmetic bugs in step 6 dialog (Floor/ceiling heights) and step 8 dialog (Auxiliary sheet) of the AEC Project Setup. The title "Finish Elev" and "Clg Ht AFF" did not show properly in step 6 dialog The title "Qty" did not show up in step 8 dialog Both dialogs show properly after I move the dialogs all the way left or right, then move them out.
8.5.0b2	8.0.0b16	When tabbing through the data bar the fields are not highlighting correctly. When moving from field to field the fields remain highlighted.
8.5.0b2	8.0.0	When you use the hatch command, you can rotate the hatch before it is put down, similar to being able to rotate a symbol. However the way you get it to rotate is different from how you get a symbol to rotate. It should be consistent with symbol placement.
8.5.0b2	8.0.1b1	When a template is chosen under the 'New' command, it should resize it's windows just like a new document. Instead, it uses it's saved values.
8.5.0b2	8.0.1b3	In hidden line rendering, a line that duplicates one in front of it but has different properties is not removed.
8.5.0b2	8.01J	When clicking on a worksheet while entering text in the text tool, the focus is not properly switched to the worksheet and keys are passed to the text tool.
8.5.0b2	8.01J	Clicking the delete vertex button when a bezier-smoothed object is selected causes a crash.
8.5.0b2	8.0.1b3	Picts do not scale asymmetrically using the scale objects dialog.
8.5.0b2	8.0.1b2	Unlock is not supported by Undo.
8.5.0b2	8.0.1b3	The statement layerScale :=GetLScale(GetLayer(parmObjH)); causes VectorWorks to crash when an object is first created.
8.5.0b2	8.0.1b5FC	The VectorScript calls SetSegPt1 and SetSegPt2 don't appear to be added to the undo buffer.
8.5.0b2	8.0.0b13	When converting a round wall with a plug in window inside to 3D POLYS the plug in window disappears leaving the wall with a hole where the window once rested. If the window is selected first the 3d poly conversion works.
8.5.0b2	8.0.1b5FC	Within the Layers Setup dialog, highlight and change the layer name in the Name field. Pressing the Cancel button still changes the name.
8.5.0b2	8.0.1b5FC	Enter a number in the Z or Delta Z field in the Layer dialog (don't tab or press enter) click on the Scale or Colors button and click OK. The number entered into the Z and Delta Z field have reverted back to 0.
8.5.0b2	8.0.1b5FC	Paste from ClarisWorks does not place any objects in the drawing, except bitmaps when they are the only thing on the clipboard.
8.5.0b2	8.0.1	Dormers in roofs are not scaled properly.
8.5.0b2	8.0.1b5FC	On Windows systems with multiple monitors, palettes fail to 'stick' across multiple sessions.
8.5.0b2	8.0.1b6FC	STR# 2102 and 5000 cannot be localized with special characters on Windows.
8.5.0b2	8.0.1b7FC	The 2D portion of Plug in objects are not showing in linked layers when checking the Project 2D box, In Top Plan views If the plug in Objects are made into symbols then the 2D portion will appear in the linked layer correctly.
8.5.0b3	8.0.0b16	Clicking on the desktop when inserting text into worksheets on Japanese systems causes a crash.
8.5.0b3	8.0.0	If the "preview" image of a plug-in object is complicated enough so that that the entire object is not shown, the bounding box for the object should be shown, as it is when inserting a symbol.
8.5.0b3	8.0.0J	The Move Page tool takes a long time to undo with large files.
8.5.0b3	8.0.0	Paste from doc 1 to doc 2 with unaligned origins can result in weirdness instead of an appropriate user alert explaining the problem.
8.5.0b3	8.0.0	A drawing with a visible, embedded worksheet, does not export properly as an EPS file.
8.5.0b3	8.0.1b3	When you are using the text tool, draw your bounding box and then go to the Text menu and switch the alignment from left to center or right. This causes a crash.
8.5.0b3	8.0.1b3	Reference files have the wrong coordinates when the files have distant origins.
8.5.0b3	8.0.1b3	The KeyDown () function does not work if another user interactive function or procedure or the CallTool procedure is executed first.
8.5.0b3	8.0.0	Option Double clicking a saved sheet in the Command palette to edit it causes a second view to open after OK is clicked
8.5.0b3	8.0.0 - 8.0.1f5	Running scripts in low memory environment can cause crashes.
8.5.0b3	8.5.0b1	After applying a texture to object you will need to close and reopen the Object info palette to get the mapping button to become active.
8.5.0b3	8.0.1	Batt insulation tool can cause printing problems when there are many "loops" in the insulation.
8.5.0b3	8.0.1b2	It appears that positional indexing is inconsistent in different styles of choice items; 1-based for pop-ups, but 0-based for list boxes.
8.5.0b3	8.0.1	The fillet tool adds corner vertices at the arc ends thereby preventing the filleted corner from having the fillet size changed.
8.5.0b3	8.0.1b1	Can't convert plug-in objects in round walls to symbols.
8.5.0b3	8.0.1b3	Double imprint of rotated text in EPS export files.
8.5.0b3	8.0.1	The Align Objects command does not work on system 7.5.
8.5.0b3	8.0.1	Plug-in objects are not exported to simple VectorScript files.
8.5.0b3	8.5.0b2	Text blocks less than a single line high will crash VW if they are drawn as proxies in grayed background layers.
8.5.0b3	8.5.0b2	When trying to create a texture from an image, you always get an error saying not enough memory. QT4 installed.
8.5.0b3	8.5.0b2	If you cycle through the vertices of a polyline using the Object Info palette, the coordinates of the vertices are all changed to the same value.
8.5.0b3	8.5.0b2	When a wall's handle is at its center in the Info palette (as opposed to its start or end) the data field for its length does not work for arithmetic additions or subtractions.
8.5.0b3	8.5.0b2	Add a symbol to the Object Browser. Close the document. When asked if you would like to save the file answer "No". If a new document is opened the Object Browser window does not refresh, it will appear as though the symbol is still available in the new document.
8.5.0b3	8.5.0b1	3D only plug-in objects cannot be picked when in Plan projection.
8.5.0b3	8.5.0b2	The Fit To Objects button on the View Bar is not working
8.5.0b3	8.5.0b2	The set by face tool in the Edit Mapping dialog does not work on extrudes and sweeps because they are now polyhedrons.
8.5.0b3	8.5.0b2	Bringing up the plug-in renderer options dialog in the document prefs dialog should not cause a dispose of the retained model. Right now it does.
8.5.0b3	8.5.0b2	When you change the symbol brightness multiplier in a rendered mode the whole screen should be redrawn. Right now just the symbol is.
8.5.0b3	8.5.0b2	I cannot Add, Subtract, or Intersect the two solid objects in the test file. I can however Add, Subtract, and Intersect these two objects in 8.0.1.
8.5.0b3	8.5.0b2	GetLength() does not return a valid value for round walls and arcs.
8.5.0b3	8.0.1	When I copy a line's angle from the OI palette to paste into the Set Grid dialogue box, I keep getting the error message, "That name is too long. The name may have up to 10 characters."
8.5.0b3	8.0.1	The half-spere inverts in the process of a mirror duplicate with the 2d and the 3d tools.
8.5.0b3	8.5.0b2	Encrypted INCLUDE files not recognized as encrypted under Windows.
8.5.0b3	8.5.0b2	The title field for help boxes for custom dialogs is not wide enough. The tails of the letters, j, p, q, and y are cut off.
8.5.0b3	8.5.0b2	The procedure Duplicate(x,y) is broken. The duplicate is shifted a fixed distance regardless of the values of x and y.
8.5.0b3	8.0.1b2	Plug in objects that begin to be inserted into a wall and then are canceled from the Default values dialog that follows initial placement crashed the app.
8.5.0b3	8.5.0b2	Insertion palette does not respond properly to new symbol folders and symbol move operations.
8.5.0b3	8.5.0b2	When making a symbol out of a plug-in object inside a wall, the symbol receives the record attached to the wall, not the record attached to the plug-in object.
8.5.0b3	8.5.0b2	when you open a doc and change save sheet views and close the doc it doesn't ask you to Save file so when you reopen the doc it is not set to your last saved view change.
8.5.0b3	8.0.1	When a pattern fill is transferred with the eyedropper in black background the fore and background colors get flipped.
8.5.0b3	8.5.0b2	For Plug-in Menus and Tool which have parameters, the Script Editor dialog should have a Parameters button which opens the Parameters dialog.
8.5.0b3	8.5.0b2	For Plug-in Menus and Tools, the edit parameters dialog should not allow the "Control Point" type to be chosen. It only applies to Plug-in Objects.
8.5.0b3	8.5.0b2	Bitmaps that are stretched to a larger size than their source image sometimes fail to print on the HP455.
8.5.0b3	8.5.0b2	Certain solid operations involving extruded polylines are not working.
8.5.0b3	8.5.0b2	Undo does not recognize a plug-in object sequence as a single undo event. There should be some sort of container around it so that an undo will remove the entire event.
8.5.0b3	8.5.0b2	When specifying mm in a constant expression, the constant is off by a factor of 10. The units are being interpreted as 0.1 mm, not 1 mm.
8.5.0b3	8.5.0b2	3D only VS tools do not properly use the 3D coordinate system.
8.5.0b3	8.5.0b2	I just noticed a problem in 8.5b2 with the Duplicate command. In previous versions, when using 'Duplicate' and dragging or '<option> dragging' an object, subsequent 'Duplicates' remember the spacing used. VW8.5b2 "forgets" this spacing.
8.5.0b4	7.0.0b6	VIEW/Lighting/Set layer ambient/ Color button - the window which opens has ASCII gibberish instead of a proper name in its title bar.
8.5.0b4	8.0.0b7	Improper handling of drawing extents - one comes in with everything microscopic. See test files. The user should have the option of using our extents or the file extents, since for performance and other reasons we can't do 100% correct all the time.
8.5.0b4	8.0.0	Large text blocks coming from MiniCad 7 causing problems. will eventually crash with continued use.
8.5.0b4	8.0.0	Editable Fields in Dialog boxes that are a larger area will word-wrap long strings of text on the Mac, but Windows will always stretch them out to be on a single non-wrapped line.
8.5.0b4	8.0.1d	Objects with line type by layer do not import from DXF with the correct line type. Also, when importing layers as classes, objects are not getting set to "by class" for line color or pen style (and line weights by class, when mapping colors to line weights).
8.5.0b4	8.0.1d	3D lines, multilines, lwpolys, and 2D poly lines that are parallel to the xy plane but not in it are not converted to 2D in DXF import when the convert to 2D option is chosen.
8.5.0b4	8.0.0	In DXF import, part of the transformation of objects with 3D rotations happens in integer space when it should happen in floating point space.
8.5.0b4	8.0.1b2	The object info palette for floors refer to its height. Shouldn't that be "thickness"? Thickness is the word used on the creation dialog.
8.5.0b4	8.0.0	When importing DXF with the convert-to-2D option, block inserts with 3D rotations get incorrectly converted to 2D symbols. A 3D symbol should be created and used for all if any of the inserts have 3D rotations. 3D symbols should also be created when the block contains a mix of 2D and 3D, or when the block is inserted into another block which is 3D.
8.5.0b4	8.0.1b3	A freehand poly is identified on the Object Info palette as a polygon. When smoothing a freehand poly the resulting shape is different than when smoothing a polygon, thus the distinction should be made by showing the proper name on the Info palette.
8.5.0b4	8.0.1b3	The text tool still does not stay within a bounding box .
8.5.0b4	8.0.1b5FC	Mac only / Under the Create Light dialog the letter (L) in the word Directional within the Kind Info section is missing.
8.5.0b4	8.5.0b1	Windows Rendered in RayMaker have a black fill in them.
8.5.0b4	8.5.0b1	LightWorks Rendering. The colors on lighted objects do not blend in 32bit mode. They "step" from shade to shade.
8.5.0b4	8.5.0b1	OpenGL sometimes renders twice in the screen.
8.5.0b4	8.5.0b1	Within a AEC workspace under the Design menu option the Drawing Border feature will not open, causes a Vector Script error
8.5.0b4	8.5.0b2	The Plug-in object Tool preferences dialog truncates plug-in titles over 20 characters.
8.5.0b4	8.5.0b2	Type a few words of text within any workspace. From VWs main menu select Text, Spacing, then choose Other. Change Size setting to any number and click OK. Move your cursor to another location and type a few words of text again, the text will not be displayed properly, the characters appear to be overlapping each other.
8.5.0b4	8.5.0b2	Extrude and sweep caps are not textured correctly with perimeter mapping type
8.5.0b4	8.5.0b2	Extrudes and sweeps with no fill are rendering with fill in QD3D mode.
8.5.0b4	8.5.0b2	Shader thumbnails on Windows have screwy color palettes.
8.5.0b4	8.5.0b2	Export 3DMF doesn't work on Windows. The export dialog needs to be ported.
8.5.0b4	8.5.0b2	The light symbol brightness multiplier is off by a factor of 100. The field in the symbol is a number from 0..1, but the OI palette should display a percentage value.
8.5.0b4	8.5.0b2Cut3	Mac only-Printing an object rendered with QD3D prints a blank page.
8.5.0b4	1.0.0b1	ToolTips and Balloon Help for PIO for Linear and Rectangular PIOs does not appear correctly. Win9X shows last PIO name, Win NT shows one letter.
8.5.0b4	8.5.0b2	Used flyover tool to look at scene with OpenGL. Tried to zoom in with zoom tool marquee and crashed (unhandled exception).
8.5.0b4	8.5.0b2	Stepping through the vertices of a polyline via the Object Info palette corrupts the polyline.
8.5.0b4	8.5.0b2	Poly() supports bezier and cubic splining via Smooth(), but arc splines do not seem to work.
8.5.0b4	8.5.0b2	SetPolylineVertex will not set an arc spline vertex or it's radius.
8.5.0b4	8.5.0b2	No gray page Border is drawn after a QD3D or LightWorks Render. It appears in all other render modes.
8.5.0b4	8.0.1	The internal VectorScript editor appears to be changing characters in this script. The "Broken" script was obtained by opening the script in the editor and clicking ok without making any changes.
8.5.0b4	8.5.0b2	VW8.5b2c2 -Rendering in LightWorks shows banding which is not present when rendered in VW8.0.1. Same video card display settings < True Color > Also the top surface of some 3d polys aren't being rendered only the sides.
8.5.0b4	8.5.0b2	The function GetRField () does not return a valid value when used with a "Dimension" parameter in a VectorScript plug-in object.
8.5.0b4	8.5.0b3	Files encrypted via the Plug-ins dialog do not work correctly when run in VectorScript. An include file encrypted through Plug-ins would not work properly; the same file encrypted via the Resource palette worked fine.
8.5.0b4	8.0.1b3	Draw a wall then insert a Simple door into the wall. Each time the insertion/head height of the door is changed on the Obj Info palette the door's swing/flip position is changed
8.5.0b4	8.5.0b3	The selection handles of a layer link are offset from it if the layer link is rotated and then the Move Page tool is used.
8.5.0b4	8.5.0b3	The cursor should change [to a small crosshair cursor] when selecting a plug-in object as it does when selecting a plug-in tool.
8.5.0b4	8.5.0b2	VectorWorks crashes when the SetHelpString() procedure is called with the item ID of a groupQuickTime>
8.5.0b4	8.5.0b2	The Quicktime settings dialog produced by the call QTSetMovieOptions() does not set the DidCancelBooleann when the user cancels it, so VS developers can't know to abort the procedure.
8.5.0b4	8.5.0b2	The Degree(°) symbol in symbol names is not being mapped correctly in the object browser. It comes up looking something like a lowercase i.
8.5.0b4	8.5.0b2	The following sequence crashes: Create a simple window plug-in object, go to the classes dialog and delete the 3 new classes that were created. Hit OK on the classes dialog, then undo in the drawing.
8.5.0b4	8.5.0b3	Renders OK in LightWorks s mode but gets a runtime error and terminates when rendered In QD3D mode.
8.5.0b4	8.5.0b3	If you have more than one csg Booleann) solid selected, the object info palette still calls it a single solid.
8.5.0b4	8.5.0b2	The Swiss/German localized version of VectorWorks has a bug where the localized name for the worksheet function LENGTH was not being recognized. The STR# 2000,37 was changed to LÄNGE but the worksheet did not recognize it. Other functions with umlaut characters were recognized, like FLÄCHE for AREA.
8.5.0b4	8.5.0b3	Simple windows insert at a incorrect height. They insert with the sill approx. 1' below the y axis or origin.
8.5.0b4	8.0.1	The alert that is supposed to tell you that you need to increase the partition size on the Mac to open a particular file is broken. It always says something like "AtLeast678AtLeast".
8.5.0b4	8.5.0b3	3D loci are always created with a default pen color of white, rendering them invisible.
8.5.0b4	8.5.0b3	Changing the color of an object shouldn't force a re-render in hidden line or dashed-hidden line mode, unless it's to no fill color.
8.5.0b4	8.5.0b3	Draw a 3D cone or sphere. On VW's menu bar select Tool then Convert to Lines. On the next dialog choose the Wireframe Rendering radio button then OK. Windows will crash, the Mac will crash when VW is closed
8.5.0b4	8.5.0b3	After switching from Pitch to Gable End then back to Pitch the Bearing Height setting is not being recognized.
8.5.0b4	8.5.0b3	Some polylines with invisible segments might not export the entire polyline to DXF.
8.5.0b4	8.5.0b3	Objects with line weight class sometimes fail to export to DXF or export incorrectly.
8.5.0b4	8.5.0b3	On Windows, a VectorScript does not read the last line of an INCLUDE file unless there is a carriage return at the end of the line.
8.5.0b4	8.5.0b3	Double-Click Create does not work for the new Linear and Rectangular Plug-in Objects.
8.5.0b4	8.0.0	When the class of a group is changed, instead of always changing the class of all the sub-objects in the group, ask the user if only the main group also all sub-object should be placed in the chosen class.
8.5.0b4	8.0.0	With polygons (not rectangles) using a 'fill by class' it is not possible to select the polygon by clicking on it's surface; it behaves as if the fill is set to none.
8.5.0b4	8.5.0b3	The shaders do not look correct in the edit texture dialog.
8.5.0b4	8.5.0b3	Textures do not seem to tile right. On a cube there is on tile of the texture on each side, except for one side which has 2.
8.5.0b4	8.0.1	Fonts that no longer are in the system but are still in the mapping dialog cause DXF imports to fail the font mapping. If the font is no longer in the system, the font mapping system should prompt for a new font (preferably with an alert telling the user that the font is now missing from their system).
8.5.0b4	8.5.0b3	Shader textures are not turning on and off with extrude and sweep caps correctly.
8.5.0b4	8.0.1	Undo in worksheets doesn't always work for Paste, Cut, and Clear.
8.5.0b4	8.0.1	The Move Page tool moves layer links incorrectly if they have been rotated.
8.5.0b4	8.5.0b3	DXF lightweight polylines with only two vertices are deleted on import.
8.5.0b4	8.5.0b3	Windows image export rendered in OpenGL causes a crash with large images (5000 x 1600) using QuickTime 3.
8.5.0b4	8.5.0b3	Attached is a desktop picture showing the file with perspective bounding box and the export image dialogue box showing an image which extends well beyond the required image. The manual suggests that only the image within the bounding box will be exported.
8.5.0b4	8.5.0b3	SetPolyPt3D does not correctly set the location of a 3d poly vertex point.
8.5.0b4	8.0.1	If you mirror and duplicate using the 2D mirror tool, the duplicate and original are placed in the incorrect list order. The duplicate maintains the original list order and the original gets put in front of all other objects.
8.5.0b4	8.5.0b3	Plug-in Editor dialogs should test for duplicate names for Plug-in Commands and Tools. The "New", "Rename", and "Duplicate" buttons will test to make sure the first 20 characters of the name are unique even if the name is up to 27 characters long.
8.5.0b4	8.0.1	There is no way to create a symbol and set the default class.
8.5.0b4	8.5.0b3	Shader textures don't work with round walls.
8.5.0b4	8.5.0b3	Objects with shader textures get random lighting results.
8.5.0b4	8.5.0b3	Walls do not export to 3DMF.
8.5.0b4	8.5.0b3	Swept open polylines and polygons have backface and lighting problems, depending on the direction of sweep and flipped matrices.
8.5.0b4	8.5.0b3	Plug-in columns are not getting the correct fill style during rendering.
8.5.0b4	8.5.0b3	Roofs with shader textures don't have the shader oriented correctly on the roof faces for the brick-like shaders.
8.5.0b4	8.5.0b3	Objects that are set by class sometimes do not get textured when they should be textured.
8.5.0b4	8.5.0b3	If you apply a shader-based texture to the top surfaces and an image-based texture to the side surfaces of a roof, the side surfaces do not orient the image correctly - it looks smeared down the walls vertically.
8.5.0b4	8.5.0b4	SetLightLocation scales the X, Y coordinates of the new location by a large factor.
8.5.0b4	8.5.0b4	Rotated solid fill bitmaps hang Japanese Win98 system when printing to postscript printers.
8.5.0b5	8.0.0b16	The scroll bars do not properly update after dragging the thumb controls.
8.5.0b5	8.0.1d	When importing DXF with points as symbols instead of loci, the other objects in the symbol in the test file disappear.
8.5.0b5	8.0.0	Define Lighting Position... The first dialog box asks user to enter area name instead of position name.
8.5.0b5	8.0.1b1	Arcs with a large radius disappear on DXF import. In MC7 they were converted to a polygon. (These arcs may cause a crash in 8.5.0b4.)
8.5.0b5	8.0.0	DXF import of polylines has some vertices appearing in the center of the drawing. Worked correctly in MC7.
8.5.0b5	8.0.1b2	Objects made of poly face meshes, such as those exported by formZ, mostly disappear on DXF import.
8.5.0b5	8.0.1b5FC	Scroll bars not updated properly after zooming.
8.5.0b5	8.5.0b2	Using the flyover tool with OpenGL-rendered models leaks memory.
8.5.0b5	8.5.0b2	Render an object using OpenGL and apply a light to the object. If the Light Kind option is set to Directional, the Brightness cannot be adjusted on the Obj Info palette. Brightness can be adjusted when using Spot and Point lighting
8.5.0b5	8.5.0b3C2	Draw a few objects within a document. Select and Lock one of the objects. Select one or all of the other unlocked objects and the Obj Info palette's Class and Layer fields remain grayed out. Close and reopen the Obj Info palette and everything is fine.
8.5.0b5	8.5.0b3	Symbols imported into the drawing from the resource palette do not show up.
8.5.0b5	8.5.0b3	The eyedropper tool does not put attributes.
8.5.0b5	8.5.0b3	If you delete a vertex from a 3-D poly via the object info palette while in reshape mode, you can no longer reshape the poly (or at least most of the vertices won't trigger a reshape.)
8.5.0b5	8.5.0b3	Export a VectorScript for a sweeped arc with negative sweep angle, and then import it, there will be a VectorScript error complaining about negative sweep angle.
8.5.0b5	8.0.1	EPS files w/PICT preview opened in QuarkXPress have a solid white background have the fill set to "none". MC7 allowed this.
8.5.0b5	8.5.0b4	If you move page and undo, objects on the page are not returned to their original location (the user origin does not reset properly.)
8.5.0b5	8.5.0b3	Symbols or Plug-in Objects in Walls do not display their handles when they are selected. Then when you deselect all, their handles show up.
8.5.0b5	8.5.0b4	Select the text tool. Draw a new text block and press the ESC key. Undo it and the application will crash.
8.5.0b5	8.5.0b4	The Rotate Left 90 and Rotate Right 90 commands have no effect on layer links.
8.5.0b5	8.5.0b4	If you import a texture from the Textures folder into a file at 1:1 scale, save it, and then open it, the texture will lose the image node attached to it.
8.5.0b5	8.5.0b4	2D objects do not draw completely when scrolling in QD3D mode on the Mac.
8.5.0b5	8.5.0b4	Inserting a symbol in wall sets the z value relative to the ground plane of the layer. In MC7 the symbol z was set relative to the bottom of the wall.
8.5.0b5	8.5.0b4	Object browser does not always open to the previous open folder on startup.
8.5.0b5	8.0.1	The Create Class command sometimes will create a class with an empty name. We have a file with empty class names, which the user said came from a DXF import. The file is essentially corrupt, and trying to edit a class will cause a crash.
8.5.0b5	8.5.0b4	You cannot exit a solid being edited if that solid contains a failed solid, but there is no indication of the cause of the problem (other than that it could not be computed). It should display a message indicating that child failed solids need to be fixed before the solid can be exited.
8.5.0b5	8.5.0b4	The preferences dialog that comes up by clicking the mode bar button has problems on Windows machines. The dialog text and the heading text is truncated for longer selections.
8.5.0b5	8.5.0b4	OpenGL does not render tiles correctly.
8.5.0b5	8.5.0b4	Sometimes when there is an error during DXF/DWG import, garbage is written to the error string instead of an error number.
8.5.0b6	8.5.0b4	Printing with Layer Color and Gray Others options selected, causes a PATFILL postscript error. The offending objects are on an inactive grayed layer and print fine when the layer is active and not grayed. everything prints fine when layer colors is turned off.
8.5.0b6	8.5.0b4i-C2	Crash occurs when removing the last document from the object browser.
8.5.0b6	8.5.0b5	Swept open polygons with non-zero pitch values are rendering with the opposite pitch direction.
8.5.0b8	8.0.0	Roofer can generate gable wall geometry which causes rendering to crash.
8.5.0	7.0.0	Macros with MiniPascal commands that specify a dimension with feet and inch marks interpret the number incorrectly when the document is in "feet" mode.
8.5.0	8.0.0	When a record is imported from a document created on the "other" platform (Mac or Windows), its default values are corrupted. Sometimes a crash will occur when the default values are displayed.
8.5.0	8.0.1b4FC	When printing Grayed Layers to a Non-PS printer, dashed line segments still print dashed. They should print as solid lines.
8.5.0	8.0.1b5FC	Plug-in objects that have radio button parameters do not have their display scroll correctly in the Obj Info palette -- the forward/backward buttons get jumbled up with the parameter list text.
8.5.0	8.0.1	A number of the Setup Assistant dialogs use "Ok" instead "OK" as button titles. One example is the dialog that has "Floor Elevation Setup" as the first string title.
8.5.0	8.5.0b3	Record-field criteria defined via the worksheet menu will not paste into the worksheet cell.
8.5.0	8.5.0b3	Set your scale to 2400 or higher. Create a circle 36 in radius. Zoom in so that the circle takes up most of the screen. Select it and choose hatch. Hit the new button on the hatch dialog. The program freezes.
8.5.0	8.5.0b4	When a record is imported from a document created on the "other" platform (Mac or Windows), its default values are corrupted. Sometimes a crash will occur when the default values are displayed.
8.5.0	8.5.0b5	Walls and other objects with records will cause crashes in solid, shaded solid, shaded-no lines, and final shaded solid renderings.
8.5.0	8.5.0b5	Printing rotated solid filled bitmaps causes extremely long print times and large print files on PS printers.
8.5.0	8.5.0b5	Text in Some textblocks are not wrapping correctly ( Super Imposed ) at certain zoom levels but look and print ok at others.
8.5.0	8.5.0b5	Transparent bitmaps appear translated down from their proper position when zoomed in on Win95/98. Their mask is in the correct place though.
8.5.0	8.5.0b5	Solids aren't correctly handling some objects which have multiple duplicate vertices on a face.
8.5.0	8.5.0b5	If you place a text block in VW 8.0.1 and try to change the alignment of the block before typing anything VW will unexpectedly quit.
8.5.0	8.5.0b5	Encrypted Include files are sometimes not being de-crypted before the script is compiled resulting VectorScript error dialog.
8.5.0	8.5.0b5	VectorScript beginsweep/endsweep does not work for sweeps with a zero PitchDistance field.
8.5.0	8.5.0b4	Round walls draw with no fill in 2D when the fill style is by class.
8.5.0	8.5.0b5	Export meta file fails for all raster renders on windows and Mac.
8.5.0	8.5.0b5	If you sweep a circle 2000 degrees at 1 degree increments and render it with QD3D, it will crash the machine.
8.5.0	8.5.0b6i-C1	Windows only-apply a texture to a swept object and render with OpenGL. Click the mapping button on the object info palette and change the Map Type to any other option (sphere, cylinder). VectorWorks will crash after clicking the OK button
8.5.0	8.5.0b6-C2	Calling WriteLn with no parameters causes an abnormal program termination.
8.5.0	8.5.0b5	When trying to enter ANY data using the Paste Criteria command (in the Worksheet menu): the Worksheet Entry dialog flashes the data for a second then closes. When you click on the worksheet, the dialog reappears but all information is lost.
8.5.0	8.0.1	The edit mapping dialog will crash if you try to edit a shader mapping dialog in thousands of colors.
8.5.0	8.5.0b6	OpenGL will crash if change screen resolution, and render the same document.
8.5.0	8.5.0b1	Serial number checks crashing or hanging on the Mac if you quit too quickly after launching VectorWorks
8.5.1	8.0.0	Table and chairs object does not adhere to standards when it comes to using styles. The 'none' class should take on the object's attributes, but it instead takes on the 'none' attributes.
8.5.1	8.0.0	Round stairs,, when in 2d view. The up/down arrow is drawn filled, covering the stair itself.
8.5.1	8.0.1	I try to apply a texture on a door or window via the editing of the class. It works for the Styles of trims and mullions but does not apply to the door and jamb itself.
8.5.1	8.0.1b2C3	Insert a GS Base Cabinet from the AEC Objects palette / accept the default settings / open a New blank document / insert a GS Wall Cabinet and accept the default settings / switch back to the first document containing the GS Base Cabinet / the Obj Info palette under Config displays the options available for the GS Wall Cabinet not the GS Base Cabinet. Closing and reopening the Obj Info palette does not refresh the options
8.5.1	8.5.0b3	The Flr/Flr height of the stair tool is calculated wrong.
8.5.1	8.5.0b6	The first time you use the escalator PIO, if you first click in the sheet area (before editing the dialog box items) you get a strange piece of text. And various pre-set settings are strange, such a a floor to floor height of 4.5 inches, etc. It's only after correcting these items in the OI palette, that the previously-mentioned text, like Cinderella at midnight, suddenly turns into the image of an escalator and the tool works fine from then on.
8.5.1	8.0.0b3	The Column PIO STILL has no units specified for any of its parameters, consequently it has virtually no size in mm units.
8.5.1	8.0.1	Attempting to place a Plug-in Object using the Offset Insertion mode would crash in certain situations. Specifically if you clicked outside of a wall, and then cancelled the resulting alert dialog.
8.5.1	8.5.0b8	When the user inserts a &q