What's Fixed in Version 8.5
|
Fixed In |
Reported In |
Description for Release |
|
8.5.0b1 |
8.0.0b15 |
The 2D Reshape tool can cause selection handles to show a reversed state. Draw a rectangle and an extrude. Select them both and choose the 2D Reshape tool. Draw the marquee around at least one of the selection handles of each object. Drag the marquee to perform the reshape. Draw another marquee. From this point on one or more of the extrude's selection handles will be reversed (off for selected, on for not selected). |
|
8.5.0b1 |
8.0.0 |
"Export VectorScript..." writes bogus statement to text file if the Worksheet contains more than one SUM column for a database row. |
|
8.5.0b1 |
8.0.1b1 |
Export 4 rectangles with the same solid fill color to EPSF. When you open the file in Illustrator, four different color numbers are generated. |
|
8.5.0b1 |
8.0.1b1 |
On Windows, you can focus on the symbol preview of the resource palette. You can not use the esc key to switch focus to the drawing. |
|
8.5.0b1 |
8.0.1b1 |
Call tool doesn't properly trap for tools which it doesn't support. Instead, it puts in a '128' which does nothing. |
|
8.5.0b1 |
8.0.1b2 |
The Mac "Create Document" dialog has key equivalents that just barely peek over the edge of the dialog. |
|
8.5.0b1 |
8.0.1b2 |
The procedure SprdFormat does not recognize a value of 8 for the 'numForm' parameter, which is Boolean. |
|
8.5.0b1 |
8.0.1b3 |
Walls with zero height or width used in solid operations should report zero volume as being the problem, not that the solid cannot be computed. |
|
8.5.0b1 |
8.0.1b2 |
Files listed in the most recently used file list that are on the root of a drive display incorrectly. They have a double backslash. For example, the file "C:\house.mcd" displays as "C:\\house.mcd". |
|
8.5.0b1 |
8.0.1b3 |
After a symmetric scale, defaults for both X and Y scaling for asymmetric scaling should be the same as the symmetric scale value. |
|
8.5.0b1 |
8.0.1b2 |
Solid operations often use twice as much memory as they should to store their geometry. |
|
8.5.0b1 |
8.0.0 |
The filled/unfilled properties of extrudes and their subobjects produce inconsistent results with the polygonal rendering modes. |
|
8.5.0b1 |
8.0.1b3 |
PROCEDURE WallHeight and PROCEDURE HLength do not work with round walls. |
|
8.5.0b1 |
8.0.1 |
Symbols with plug-ins that observe the plug-ins loci for cutting the wall do not work right when the symbol origin and the plug-ing origin are not the same. |
|
8.5.0b1 |
8.0.1b3 |
When viewed along its axis, a wall's selection handles disappear. |
|
8.5.0b1 |
8.0.1b3 |
After exporting and then importing a Vectorscript file, Vectorworks adds a summation icon where one doesn't exist. |
|
8.5.0b1 |
8.5.0d |
Locus3D does not correctly set the 3D locus as the last created object, so LNewObj fails to return a valid object handle in VectorScript. |
|
8.5.0b1 |
8.0.1b3 |
When you place a dormer in a roof and try to edit the dormer you cannot switch between dormers, cancel is the only option. |
|
8.5.0b1 |
8.0.1b3 |
If a wall with a symbol is subtracted from another object, the symbol from the wall is duplicated. It would probably make more sense for it to disappear. |
|
8.5.0b1 |
8.0.1b3 |
A sweep of less than 360 degrees of a circle does not work as a component of solid operations (add, subtract, intersect.) |
|
8.5.0b1 |
8.0.1b5FC |
The access keys in the Layers Setup dialog for Delta Z (+) and the Transfer Mode (M) do not access the fields. There are currently two M access keys available within this dialog. |
|
8.5.0b2 |
8.0.0b6 |
The cursor is not changing back to an arrow when using the feature size widgets in the Edit Texture Image dialog on Windows. |
|
8.5.0b2 |
8.0.0b14 |
Sills on windows don't take on either Class colors nor the color assigned to the window container. I think they ought to match the trim color. |
|
8.5.0b2 |
8.0.0b14 |
Workspace Editor allows a locked workspace to be edited. |
|
8.5.0b2 |
8.0.0b15 |
If you click the Mapping button on the Textures pane of the Object Info palette, and then hit Cancel in the resulting dialog, Vectorworks still insists on rendering the drawing. |
|
8.5.0b2 |
8.0.0b15 |
there are two cosmetic
bugs in step 6 dialog (Floor/ceiling heights)
and step 8 dialog (Auxilliary sheet) of fhe
AEC Project Setup. |
|
8.5.0b2 |
8.0.0b16 |
When tabing through the data bar the field are not highlighting correctly. When moving from field to field the fields are not un-highlighting. |
|
8.5.0b2 |
8.0.0 |
When you use the hatch command, you can rotate the hatch before it is put down, similar to being able to rotate a symbol. However the way you get it to rotate is different from how you get a symbol to rotate. It should be consistent with symbol placement. |
|
8.5.0b2 |
8.0.1b1 |
When a template is chosen under the 'New' command, it should resize it's windows just like a new document. Instead, it uses it's saved values. |
|
8.5.0b2 |
8.0.1b3 |
In hidden line rendering, a line that duplicates one in front of it but has different properties is not removed. |
|
8.5.0b2 |
8.01J |
When clicking on a worksheet while entering text in the text tool, the focus is not properly switched to the worksheet and keys are passed to the text tool. |
|
8.5.0b2 |
8.01J |
Clicking the delete vertex button when a bezier-smoothed object is selected causes a crash. |
|
8.5.0b2 |
8.0.1b3 |
Picts do not scale asymmetrically using the scale objects dialog. |
|
8.5.0b2 |
8.0.1b2 |
Unlock is not supported by Undo. |
|
8.5.0b2 |
8.0.1b3 |
The statement |
|
8.5.0b2 |
8.0.1b5FC |
The VectorScript calls SetSegPt1 and SetSegPt2 don't appear to be added to the undo buffer. |
|
8.5.0b2 |
8.0.0b13 |
When converting a round wall with a plug in window inside to 3D POLYS the plug in window disapperas leaving the wall with a hole where the window once rested. If the window is selected first the 3d poly conversion works. |
|
8.5.0b2 |
8.0.1b5FC |
Within the Layers Setup dialog, highlight and change the layer name in the Name field. Pressing the Cancel button still changes the name. |
|
8.5.0b2 |
8.0.1b5FC |
Enter a number in the Z or Delta Z field in the Layer dialog (don't tab or press enter) click on the Scale or Colors button and click OK. The number entered into the Z and Delta Z field have reverted back to 0. |
|
8.5.0b2 |
8.0.1b5FC |
Paste from ClarisWorks does not place any objects in the drawing, except bitmaps when they are the only thing on the clipboard. |
|
8.5.0b2 |
8.0.1 |
Dormers in roofs are not scaled properly. |
|
8.5.0b2 |
8.0.1b5FC |
On Windows systems with multiple monitors, palettes fail to 'stick' across multiple sessions. |
|
8.5.0b2 |
8.0.1b6FC |
STR# 2102 and 5000 cannot be localized with special characters on Windows. |
|
8.5.0b2 |
8.0.1b7FC |
The 2D portion of Plug in objects are not showing in linked layers when checking the Project 2D box, In Top Plan views If the plug in Objects are made into symbols then the 2D portion will appear in the linked layer correctly. |
|
8.5.0b3 |
8.0.0b16 |
Clicking on the desktop when inserting text into worksheets on Japanese systems causes a crash. |
|
8.5.0b3 |
8.0.0 |
If the "preview" image of a plug-in object is complicated enough so that that the entire object is not shown, the bounding box for the object should be shown, as it is when inserting a symbol. |
|
8.5.0b3 |
8.0.0J |
The Move Page tool takes a long time to undo with large files. |
|
8.5.0b3 |
8.0.0 |
Paste from doc 1 to doc 2 with unaligned origins can result in weirdness instead of an appropriate user alert explaining the problem. |
|
8.5.0b3 |
8.0.0 |
A drawing with a visible, embedded worksheet, does not export properly as an EPS file. |
|
8.5.0b3 |
8.0.1b3 |
When you are using the
text tool, draw your bounding box and then
go to the Text menu and switch the alignment
from left to center or right. This causes
a crash. |
|
8.5.0b3 |
8.0.1b3 |
Reference files have the wrong coordinates when the files have distant origins. |
|
8.5.0b3 |
8.0.1b3 |
The KeyDown () function does not work if another user interactive function or procedure or the CallTool procedure is executed first. |
|
8.5.0b3 |
8.0.0 |
Opion Double clicking a saved sheet in the Command palette to edit it causes a second view to open after OK is clicked |
|
8.5.0b3 |
8.0.0 - 8.0.1f5 |
Running scripts in low memory environment can cause crashes. |
|
8.5.0b3 |
8.5.0b1 |
After applying a texture to object you will need to close and reopen the Object info pallete to get the mapping button to become active. |
|
8.5.0b3 |
8.0.1 |
Batt insulation tool can cause printing problems when there are many "loops" in the insulation. |
|
8.5.0b3 |
8.0.1b2 |
It appears that positional indexing is inconsistent in different styles of choice items; 1-based for popups, but 0-based for list boxes. |
|
8.5.0b3 |
8.0.1 |
The fillet tool adds corner verticies at the arc ends thereby preventing the filleted corner from having the fillet size changed. |
|
8.5.0b3 |
8.0.1b1 |
Can't convert plug-in objects in round walls to symbols. |
|
8.5.0b3 |
8.0.1b3 |
Double imprint of rotated text in EPS export files. |
|
8.5.0b3 |
8.0.1 |
The Align Objects command does not work on system 7.5. |
|
8.5.0b3 |
8.0.1 |
Plug-in objects are not exported to simple VectorScript files. |
|
8.5.0b3 |
8.5.0b2 |
Text blocks less than a single line high will crash VW if they are drawn as proxys in grayed background layers. |
|
8.5.0b3 |
8.5.0b2 |
When trying to create a texture from an image, you always get an error saying not enough memory. QT4 installed. |
|
8.5.0b3 |
8.5.0b2 |
If you cycle through the vertices of a polyline using the Object Info palette, the coordinates of the verticies are all changed to the same value. |
|
8.5.0b3 |
8.5.0b2 |
When a wall's handle is
at its center in the Info palette (as opposed
to its |
|
8.5.0b3 |
8.5.0b2 |
Add a symbol to the Object Browser. Close the document. When asked if you would like to save the file answer "No". If a new document is opened the Object Browser window does not refresh, it will appear as though the symbol is still available in the new document. |
|
8.5.0b3 |
8.5.0b1 |
3D only plug-in objects cannot be picked when in Plan projection. |
|
8.5.0b3 |
8.5.0b2 |
The Fit To Objects button on the View Bar is not working |
|
8.5.0b3 |
8.5.0b2 |
The set by face tool in the Edit Mapping dialog does not work on extrudes and sweeps because they are now polyhedrons. |
|
8.5.0b3 |
8.5.0b2 |
Bringing up the plugin renderer options dialog in the document prefs dialog should not cause a dispose of the retained model. Right now it does. |
|
8.5.0b3 |
8.5.0b2 |
When you change the symbol brightness multiplier in a rendered mode the whole screen should be redrawn. Right now just the symbol is. |
|
8.5.0b3 |
8.5.0b2 |
I cannot Add, Subtract, or Intersect the two solid objects in the test file. I can however Add, Subtract, and Intersect these two objects in 8.0.1. |
|
8.5.0b3 |
8.5.0b2 |
GetLength() does not return a valid value for round walls and arcs. |
|
8.5.0b3 |
8.0.1 |
When I copy a line's angle
from the OI palette to paste into the Set
Grid |
|
8.5.0b3 |
8.0.1 |
The half-spere inverts in the process of a mirror duplicate with the 2d and the 3d tools. |
|
8.5.0b3 |
8.5.0b2 |
Encrypted INCLUDE files not recognized as encrypted under Windows. |
|
8.5.0b3 |
8.5.0b2 |
The title field for help boxes for custom dialogs is not wide enough. The tails of the letters, j, p, q, and y are cut off. |
|
8.5.0b3 |
8.5.0b2 |
The procedure Duplicate(x,y) is broken. The duplicate is shifted a fixed distance regardless of the values of x and y. |
|
8.5.0b3 |
8.0.1b2 |
Plug in objects that begin to be inserted into a wall and then are canceled from the Default values dialog that follows initial placement crashed the app. |
|
8.5.0b3 |
8.5.0b2 |
Insertion palette does not respond properly to new symbol folders and symbol move operations. |
|
8.5.0b3 |
8.5.0b2 |
When making a symbol out of a plug-in object inside a wall, the symbol recieves the record attached to the wall, not the record attached to the plug-in object. |
|
8.5.0b3 |
8.5.0b2 |
when you open a doc and change save sheet views and close the doc it doesn't ask you to Save file so when you reopen the doc it is not set to your last saved view change. |
|
8.5.0b3 |
8.0.1 |
When a pattern fill is
transfered with the eyedropper in black background
the fore and background colors get flipped. |
|
8.5.0b3 |
8.5.0b2 |
For Plug-in Menus and Tool which have parameters, the Script Editor dialog should have a Parameters button which opens the Parameters dialog. |
|
8.5.0b3 |
8.5.0b2 |
For Plug-in Menus and Tools,
the edit parameters dialog should not allow
the "Control Point" type to be
chosen. It only applies to Plug-in Objects. |
|
8.5.0b3 |
8.5.0b2 |
Bitmaps that are stretched to a larger size than their source image sometimes fail to print on the HP455. |
|
8.5.0b3 |
8.5.0b2 |
Certain solid operations involving extruded polylines are not working. |
|
8.5.0b3 |
8.5.0b2 |
Undo does not recognize a plug-in object sequence as a single undo event. There should be some sort of container around it so that an undo will remove the entire event. |
|
8.5.0b3 |
8.5.0b2 |
When specifying mm in a constant expression, the constant is off by a factor of 10. The units are being interpreted as 0.1 mm, not 1 mm. |
|
8.5.0b3 |
8.5.0b2 |
3D only VS tools do not properly use the 3D coordinate system. |
|
8.5.0b3 |
8.5.0b2 |
I just noticed a problem in 8.5b2 with the Duplicate command. In previous versions, when using 'Duplicate' and dragging or '<option> dragging' an object, subsequent 'Duplicates' remember the spacing used. VW8.5b2 "forgets" this spacing. |
|
8.5.0b4 |
7.0.0b6 |
VIEW/Lighting/Set layer ambient/ Color button - the window which opens has ascii gibberish instead of a proper name in its title bar. |
|
8.5.0b4 |
8.0.0b7 |
Improper handling of drawing extents - one comes in with everything microscopic. See test files. The user should have the option of using our extents or the file extents, since for performance and other reasons we can't do 100% correct all the time. |
|
8.5.0b4 |
8.0.0 |
Large text blocks coming from Minicad 7 causing problems. will eventually crash with continued use. |
|
8.5.0b4 |
8.0.0 |
Editable Fields in Dialog boxes that are a larger area will word-wrap long strings of text on the Mac, but Windows will always strech them out to be on a single non-wrapped line. |
|
8.5.0b4 |
8.0.1d |
Objects with linetype by layer do not import from DXF with the correct line type. Also, when importing layers as classes, objects are not getting set to "by class" for line color or penstyle (and lineweights by class, when mapping colors to lineweights). |
|
8.5.0b4 |
8.0.1d |
3D lines, multilines, lwpolys, and 2D polylines that are parallel to the xy plane but not in it are not converted to 2D in DXF import when the convert to 2D option is chosen. |
|
8.5.0b4 |
8.0.0 |
In DXF import, part of the transformation of objects with 3D rotations happens in integer space when it should happen in floating point space. |
|
8.5.0b4 |
8.0.1b2 |
The object info palette for floors refer to its height. Shouldn't that be "thickness"? Thickness is the word used on the creation dialog. |
|
8.5.0b4 |
8.0.0 |
When importing DXF with the convert-to-2D option, block inserts with 3D rotations get incorrectly converted to 2D symbols. A 3D symbol should be created and used for all if any of the inserts have 3D rotations. 3D symbols should also be created when the block contains a mix of 2D and 3D, or when the block is inserted into another block which is 3D. |
|
8.5.0b4 |
8.0.1b3 |
A freehand poly is identified on the Object Info palette as a polygon. When smoothing a freehand poly the resulting shape is different than when smoothing a polygon, thus the distinction should be made by showing the proper name on the Info palette. |
|
8.5.0b4 |
8.0.1b3 |
The text tool still does not stay within a bounding box . |
|
8.5.0b4 |
8.0.1b5FC |
Mac only / Under the Create Light dialog the letter (L) in the word Directional within the Kind Info section is missing. |
|
8.5.0b4 |
8.5.0b1 |
Windows Rendered in Raymaker have a black fill in them. |
|
8.5.0b4 |
8.5.0b1 |
Lightworks Rendering. The
colors on lighted objects do not blend in
32bit mode. They "step" from shade
to shade. |
|
8.5.0b4 |
8.5.0b1 |
OpenGL sometimes renders twice in the screen. |
|
8.5.0b4 |
8.5.0b1 |
Within a AEC workspace under the Design menu option the Drawing Border feature will not open, causes a Vector Script error |
|
8.5.0b4 |
8.5.0b2 |
The Plug-in object Tool preferences dialog truncates plug-in titles over 20 characters. |
|
8.5.0b4 |
8.5.0b2 |
Type a few words of text within any workspace. From VWs main menu select Text, Spacing, then choose Other. Change Size setting to any number and click OK. Move your cursor to another location and type a few words of text again, the text will not be displayed properly, the characters appear to be overlapping each other. |
|
8.5.0b4 |
8.5.0b2 |
Extrude and sweep caps are not textured correctly with perimeter mapping type |
|
8.5.0b4 |
8.5.0b2 |
Extrudes and sweeps with
no fill are rendering with fill in QD3D mode. |
|
8.5.0b4 |
8.5.0b2 |
Shader thumbnails on Windows have screwy color palettes. |
|
8.5.0b4 |
8.5.0b2 |
Export 3DMF doesn't work on Windows. The export dialog needs to be ported. |
|
8.5.0b4 |
8.5.0b2 |
The light symbol brightness multiplier is off by a factor of 100. The field in the symbol is a number from 0..1, but the OI palette should display a percentage value. |
|
8.5.0b4 |
8.5.0b2Cut3 |
Mac only-Printing an object rendered with QD3D prints a blank page. |
|
8.5.0b4 |
1.0.0b1 |
ToolTips and Balloon Help for PIO for Linear and Rectangular PIOs does not appear corretly. Win9X shows last PIO name, Win NT shows one letter. |
|
8.5.0b4 |
8.5.0b2 |
Used flyover tool to look at scene with OpenGL. Tried to zoom in with zoom tool marquee and crashed (unhandled exception). |
|
8.5.0b4 |
8.5.0b2 |
Stepping through the vertices of a polyline via the Object Info palette corrupts the polyline. |
|
8.5.0b4 |
8.5.0b2 |
Poly() supports bezier and cubic splining via Smooth(), but arc splines do not seem to work. |
|
8.5.0b4 |
8.5.0b2 |
SetPolylineVertex will not set an arc spline vertex or it's radius. |
|
8.5.0b4 |
8.5.0b2 |
No gray page Border is drawn after a QD3D or Lightworks Render. It appears in all other render modes. |
|
8.5.0b4 |
8.0.1 |
The internal vectorscript
editor appears to be changing characters
in this script. The "Broken" script
was obtained by opening the script in the
editor and clicking ok without making any
changes. |
|
8.5.0b4 |
8.5.0b2 |
VW8.5b2c2 -Rendering in lightworks shows banding which is not present when renedered in VW8.0.1. Same video card display settings < True Color > Also the top surface of some 3d polys aren't being rendered only the sides. |
|
8.5.0b4 |
8.5.0b2 |
The function GetRField () does not return a valid value when used with a "Dimension" parameter in a VectorScript plug-in object. |
|
8.5.0b4 |
8.5.0b3 |
Files encrypted via the
Plug-ins dialog do not work correctly when |
|
8.5.0b4 |
8.0.1b3 |
Draw a wall then insert a Simple door into the wall. Each time the insertion/head height of the door is changed on the Obj Info palette the door's swing/flip position is changed |
|
8.5.0b4 |
8.5.0b3 |
The selection handles of a layer link are offset from it if the layer link is rotated and then the Move Page tool is used. |
|
8.5.0b4 |
8.5.0b3 |
The cursor should change [to a small crosshair cursor] when selecting a plug-in object as it does when selecting a plug-in tool. |
|
8.5.0b4 |
8.5.0b2 |
Vectorworks crashes when the SetHelpString() procedure is called with the item ID of a groupbox. |
|
8.5.0b4 |
8.5.0b2 |
The Quicktime settings dialog produced by the call QTSetMovieOptions() does not set the DidCancel boolean when the user cancels it, so VS developers can't know to abort the procedure. |
|
8.5.0b4 |
8.5.0b2 |
The Degree(°) symbol in symbol names is not being mapped correctly in the object browser. It comes up looking something like a lowercase i. |
|
8.5.0b4 |
8.5.0b2 |
The following sequence
crashes: Create a simple window plug-in object,
go to the classes dialog and delete the 3
new classes that were created. Hit OK on
the classes dialog, then undo in the drawing. |
|
8.5.0b4 |
8.5.0b3 |
Renders OK in Lightworks mode but gets a runtime error and terminates when rendered In QD3D mode. |
|
8.5.0b4 |
8.5.0b3 |
If you have more than one csg (boolean) solid selected, the object info palette still calls it a single solid. |
|
8.5.0b4 |
8.5.0b2 |
The Swiss/German localized version of Vectorworks has a bug where the localized name for the worksheet function LENGTH was not being recognized. The STR# 2000,37 was changed to LÄNGE but the worksheet did not recognize it. Other functions with umlaut characters were recognized, like FLÄCHE for AREA. |
|
8.5.0b4 |
8.5.0b3 |
Simple windows insert at a incorrect height. They insert with the sill approx. 1' below the y axis or 0 orgin. |
|
8.5.0b4 |
8.0.1 |
The alert that is supposed to tell you that you need to increase the partition size on the Mac to open a particular file is broken. It always says something like "AtLeast678AtLeast". |
|
8.5.0b4 |
8.5.0b3 |
3D loci are always created with a default pen color of white, rendering them invisible. |
|
8.5.0b4 |
8.5.0b3 |
Changing the color of an object shouldn't force a re-render in hidden line or dashed-hidden line mode, unless it's to no fill color. |
|
8.5.0b4 |
8.5.0b3 |
Draw a 3D cone or sphere. On VW's menu bar select Tool then Convert to Lines. On the next dialog choose the Wireframe Rendering radio button then OK. Windows will crash, the Mac will crash when VW is closed |
|
8.5.0b4 |
8.5.0b3 |
After switching from Pitch to Gable End then back to Pitch the Bearing Height setting is not being recognized. |
|
8.5.0b4 |
8.5.0b3 |
Some polylines with invisible segments might not export the entire polyline to DXF. |
|
8.5.0b4 |
8.5.0b3 |
Objects with lineweight by class sometimes fail to export to DXF or export incorrectly. |
|
8.5.0b4 |
8.5.0b3 |
On Windows, a VectorScript does not read the last line of an INCLUDE file unless there is a carriage return at the end of the line. |
|
8.5.0b4 |
8.5.0b3 |
Double-Click Create does not work for the new Linear and Rectangular Plug-in Objects. |
|
8.5.0b4 |
8.0.0 |
When the class of a group
is changed, instead of always changing the
class of all the subobjects in the group,
ask the user if only the maingroup or also
all subobjects should be placed in the chosen
class. |
|
8.5.0b4 |
8.0.0 |
With polygons (not rectangles)
using a 'fill by class' it is not possible |
|
8.5.0b4 |
8.5.0b3 |
The shaders do not look correct in the edit texture dialog. |
|
8.5.0b4 |
8.5.0b3 |
Textures do not seem to tile right. On a cube there is on tile of the texture on each side, except for one side which has 2. |
|
8.5.0b4 |
8.0.1 |
Fonts that no longer are in the system but are still in the mapping dialog cause DXF imports to fail the font mapping. If the font is no longer in the system, the font mapping system should prompt for a new font (preferably with an alert telling the user that the font is now missing from their system). |
|
8.5.0b4 |
8.5.0b3 |
Shadered textures are not turning on and off with extrude and sweep caps correctly. |
|
8.5.0b4 |
8.0.1 |
Undo in worksheets doesn't
always work for Paste, Cut, and Clear. |
|
8.5.0b4 |
8.0.1 |
The Move Page tool moves layer links incorrectly if they have been rotated. |
|
8.5.0b4 |
8.5.0b3 |
DXF lightweight polylines with only two vertices are deleted on import. |
|
8.5.0b4 |
8.5.0b3 |
Windows image export rendered in OpenGL causes a crash with large images (5000 x 1600) using QuickTime 3. |
|
8.5.0b4 |
8.5.0b3 |
Attached is a desktop picture showing the file with perspective bounding box and the export image dialogue box showing an image which extends well beyond the required image. The manual suggests that only the image within the bounding box will be exported. |
|
8.5.0b4 |
8.5.0b3 |
SetPolyPt3D does not correctly
set the location of a 3d poly vertex point. |
|
8.5.0b4 |
8.0.1 |
If you mirror and duplicate using the 2D mirror tool, the duplicate and original are placed in the incorrect list order. The duplicate maintains the original list order and the original gets put in front of all other objects. |
|
8.5.0b4 |
8.5.0b3 |
Plug-in Editor dialogs should test for duplicate names for Plug-in Commands and Tools. The "New", "Rename", and "Duplicate" buttons will test to make sure the first 20 characters of the name are unique even if the name is up to 27 characters long. |
|
8.5.0b4 |
8.0.1 |
There is no way to create a symbol and set the default class. |
|
8.5.0b4 |
8.5.0b3 |
Shader textures don't work with round walls. |
|
8.5.0b4 |
8.5.0b3 |
Objects with shader textures get random lighting results. |
|
8.5.0b4 |
8.5.0b3 |
Walls do not export to 3DMF. |
|
8.5.0b4 |
8.5.0b3 |
Swept open polylines and polygons have backface and lighting problems, depending on the direction of sweep and flipped matrices. |
|
8.5.0b4 |
8.5.0b3 |
Plugin columns are not getting the correct fill style during rendering. |
|
8.5.0b4 |
8.5.0b3 |
Roofs with shader textures don't have the shader oriented correctly on the roof faces for the brick-like shaders. |
|
8.5.0b4 |
8.5.0b3 |
Objects that are set by class sometimes do not get textured when they should be textured. |
|
8.5.0b4 |
8.5.0b3 |
If you apply a shader-based texture to the top surfaces and an image-based texture to the side surfaces of a roof, the side surfaces do not orient the image correctly - it looks smeared down the walls vertically. |
|
8.5.0b4 |
8.5.0b4 |
SetLightLocation scales the X, Y coordinates of the new location by a large factor. |
|
8.5.0b4 |
8.5.0b4 |
Rotated solid fill bitmaps hang Japanese Win98 system when printing to postscript printers. |
|
8.5.0b5 |
8.0.0b16 |
The scroll bars do not properly update after dragging the thumb controls. |
|
8.5.0b5 |
8.0.1d |
When importing DXF with points as symbols instead of loci, the other objects in the symbol in the test file disappear. |
|
8.5.0b5 |
8.0.0 |
Define Lighting Position... |
|
8.5.0b5 |
8.0.1b1 |
Arcs with a large radius disappear on DXF import. In MC7 they were converted to a polygon. (These arcs may cause a crash in 8.5.0b4.) |
|
8.5.0b5 |
8.0.0 |
DXF import of polylines has some vertices appearing in the center of the drawing. worked correctly in MC7. |
|
8.5.0b5 |
8.0.1b2 |
Objects made of poly face meshes, such as those exported by formZ, mostly disappear on DXF import. |
|
8.5.0b5 |
8.0.1b5FC |
Scroll bars not updated properly after zooming. |
|
8.5.0b5 |
8.5.0b2 |
Using the flyover tool with OpenGL-rendered models leaks memory. |
|
8.5.0b5 |
8.5.0b2 |
Render an object using OpenGL and apply a light to the object. If the Light Kind option is set to Directional, the Brightness cannot be adjusted on the Obj Info palette. Brightness can be adjusted when using Spot and Point lighting |
|
8.5.0b5 |
8.5.0b3C2 |
Draw a few objects within a document. Select and Lock one of the objects. Select one or all of the other unlocked objects and the Obj Info palette's Class and Layer fields remain greyed out. Close and reopen the Obj Info palette and everything is fine. |
|
8.5.0b5 |
8.5.0b3 |
Symols imported into the drawing from the resource palette do not show up. |
|
8.5.0b5 |
8.5.0b3 |
The eyedropper tool does not put attributes. |
|
8.5.0b5 |
8.5.0b3 |
If you delete a vertex from a 3-D poly via the object info palette while in reshape mode, you can no longer reshape the poly (or at least most of the vertices won't trigger a reshape.) |
|
8.5.0b5 |
8.5.0b3 |
Export a VectorScript for a sweeped arc with negative sweep angle, and then import it, there will be a VectorScript error complaining about negative sweep angle. |
|
8.5.0b5 |
8.0.1 |
EPS files w/PICT preview opened in QuarkXPress have a solid white background have the fill set to "none". MC7 allowed this. |
|
8.5.0b5 |
8.5.0b4 |
If you move page and undo, objects on the page are not returned to their original location (the user origin does not reset properly.) |
|
8.5.0b5 |
8.5.0b3 |
Symbols or Plug-in Objects in Walls do not display their handles when they are selected. Then when you deselect all, their handles show up. |
|
8.5.0b5 |
8.5.0b4 |
Select the text tool. Draw a new text block and press the ESC key. Undo it and the application will crash. |
|
8.5.0b5 |
8.5.0b4 |
The Rotate Left 90 and Rotate Right 90 commands have no effect on layer links. |
|
8.5.0b5 |
8.5.0b4 |
If you import a texture from the Textures folder into a file at 1:1 scale, save it, and then open it, the texture will lose the image node attached to it. |
|
8.5.0b5 |
8.5.0b4 |
2D objects do not draw completely when scrolling in QD3D mode on the Mac. |
|
8.5.0b5 |
8.5.0b4 |
Inserting a symbol in wall
sets the z value relative to the ground plane
of the layer. In MC7 the symbol z was set
relative to the bottom of the wall. |
|
8.5.0b5 |
8.5.0b4 |
Object browser does not always open to the previous open folder on startup. |
|
8.5.0b5 |
8.0.1 |
The CreateClass command sometimes will create a class with an empty name. We have a file with empty class names, which the user said came from a DXF import. The file is essentially corrupt, and trying to edit a class will cause a crash. |
|
8.5.0b5 |
8.5.0b4 |
You cannot exit a solid being edited if that solid contains a failed solid, but there is no indication of the cause of the problem (other than that it could not be computed). It should display a message indicating that child failed solids need to be fixed before the solid can be exited. |
|
8.5.0b5 |
8.5.0b4 |
The preferences dialog that comes up by clicking the mode bar button has problems on Windows machines. The dialog text and the heading text is truncated for longer selections. |
|
8.5.0b5 |
8.5.0b4 |
OpenGL does not render tiles correctly. |
|
8.5.0b5 |
8.5.0b4 |
Sometimes when there is an error during DXF/DWG import, garbage is written to the error string instead of an error number. |
|
8.5.0b6 |
8.5.0b4 |
Printing with Layer Color and Gray Others options selected, causes a PATFILL postscript error. The offending objects are on an inactive grayed layer and print fine when the layer is active and not grayed. everything prints fine when layer colors is turned off. |
|
8.5.0b6 |
8.5.0b4i-C2 |
Crash occurs when removing the last document from the object browser. |
|
8.5.0b6 |
8.5.0b5 |
Swept open polygons with non-zero pitch values are rendering with th opposite pitch direction. |
|
8.5.0b8 |
8.0.0 |
Roofer can generate gable wall geometry which causes rendering to crash. |
|
8.5.0 |
7.0.0 |
Macros with MiniPascal commands that specify a dimension with feet and inch marks interpret the number incorrectly when the document is in "feet" mode. |
|
8.5.0 |
8.0.0 |
When a record is imported from a document created on the "other" platform (Mac or Windows), its default values are corrupted. Sometimes a crash will occur when the default values are displayed. |
|
8.5.0 |
8.0.1b4FC |
When printing Grayed Layers to a Non-PS printer, dashed line segments still print dashed. They should print as solid lines. |
|
8.5.0 |
8.0.1b5FC |
Plug-in objects that have radio button parameters do not have their display scroll correctly in the Obj Info palette -- the forward/backward buttons get jumbled up with the parameter list text. |
|
8.5.0 |
8.0.1 |
A number of the Setup Assistant dialogs use "Ok" instead "OK" as button titles. One example is the dialog that has "Floor Elevation Setup" as the first string title. |
|
8.5.0 |
8.5.0b3 |
Record-field criteria defined via the worksheet menu will not paste into the worksheet cell. |
|
8.5.0 |
8.5.0b3 |
Set your scale to 2400 or higher. Create a circle 36 in radius. Zoom in so that the circle takes up most of the screen. Select it and choose hatch. Hit the new button on the hatch dialog. The program freezes. |
|
8.5.0 |
8.5.0b4 |
When a record is imported from a document created on the "other" platform (Mac or Windows), its default values are corrupted. Sometimes a crash will occur when the default values are displayed. |
|
8.5.0 |
8.5.0b5 |
Walls and other objects with records will cause crashes in solid, shaded solid, shaded-no lines, and final shaded solid renderings. |
|
8.5.0 |
8.5.0b5 |
Printing rotated solid filled bitmaps causes extremly long print times and large print files on PS printers. |
|
8.5.0 |
8.5.0b5 |
Text in Some textblocks are not wrapping correctly ( Super Imposed ) at certain zoom levels but look and print ok at others. |
|
8.5.0 |
8.5.0b5 |
Transparent bitmaps appear translated down from their proper position when zoomed in on Win95/98. Their mask is in the correct place though. |
|
8.5.0 |
8.5.0b5 |
Solids aren't correctly handling some objects which have multiple duplicate vertices on a face. |
|
8.5.0 |
8.5.0b5 |
If you place a text block in VW 8.0.1 and try to change the alignment of the block before typing anything VW will unexpectedly quit. |
|
8.5.0 |
8.5.0b5 |
Encrypted Include files are sometimes not being de-crypted before the script is compiled resulting VectorScript error dialog. |
|
8.5.0 |
8.5.0b5 |
VectorScript beginsweep/endsweep does not work for sweeps with a zero PitchDistance field. |
|
8.5.0 |
8.5.0b4 |
Round walls draw with no fill in 2D when the fill style is by class. |
|
8.5.0 |
8.5.0b5 |
Export meta file fails for all raster renders on windows and Mac. |
|
8.5.0 |
8.5.0b5 |
If you sweep a circle 2000 degrees at 1 degree increments and render it with QD3D, it will crash the machine. |
|
8.5.0 |
8.5.0b6i-C1 |
Windows only-apply a texture to a swept object and render with OpenGL. Click the mapping button on the object info palette and change the Map Type to any other option (sphere, cylinder). Vectorworks will crash after clicking the OK button |
|
8.5.0 |
8.5.0b6-C2 |
Calling WriteLn with no parameters causes an abnormal program termination. |
|
8.5.0 |
8.5.0b5 |
When trying to enter ANY data using the Paste Criteria command (in the Worksheet menu): the Worksheet Entry dialog flashes the data for a second then closes. When you click on the worksheet, the dialog reappears but all information is lost. |
|
8.5.0 |
8.0.1 |
The edit mapping dialog will crash if you try to edit a shadered mapping dialog in thousands of colors. |
|
8.5.0 |
8.5.0b6 |
OpenGL will crash if change screen resolution, and render the same document. |
|
8.5.0 |
8.5.0b1 |
Serial number checks crashing or hanging on the Mac if you quit too quickly after launching Vectorworks |